In addition to the patches and updates listed in sections 1.2.1.1 Mandatory NetWare System Patches, 1.2.2 Verifying BTRIEVE and 1.2.3 Verifying TCP/IP Protocol , Unoverica Corporation requires that you define some NetWare variables that will allow Unoverica Message Transport to run more efficiently. These parameters must be defined in the NetWare servers STARTUP.NCF file.
For information on these variables, refer to the NetWare documentation. For information on how to edit STARTUP.NCF, refer to the NetWare documentation.
The three system variables that must be defined are:
NOTE: Some of the required modifications listed in this chapter will require that you restart the server. Do not begin the installation process or apply any system updates until you are able to restart the server without interrupting user sessions or critical system functions.
WARNING: If the NetWare server you wish to use for Unoverica Message Transport does not meet the minimum system requirements specified in this chapter, you will encounter problems during the installation or operation of Unoverica Message Transport. These problems may be minor annoyances, a lack of expected functionality (such as mail messages not getting delivered successfully), or total system failure resulting in lost data.
STEP: To continue to the next step in the verification process, go to section 1.2.5.1 Increase the Packet Receive Buffers.
Copyright 1997 Unoverica Corporation. All Rights Reserved page
Send comments to docs@unoverica.com