From the main INETCFG menu, select the "Boards" menu option and press <Enter>. You will be presented with a screen similar to the following:
Figure 2.10: INETCFG's "Configured Boards" settings.
If your network adapter does not show up in this screen, then you are not using INETCFG to manage your LAN drivers and protocols (although you may be using it to manage your WAN drivers and protocols). Press <Esc> to close the "Configured Boards" window, and then press <Esc> again to close INETCFG and return to the NetWare console prompt. Skip to section 2.3.2 Using Console Commands and load the LAN driver manually.
If your LAN driver does appear in this window, then press <Esc> to close the "Configured Boards" window. You do not need to re-add the LAN driver as INETCFG will do this for you once the TCP/IP protocol has been loaded.
STEP: To continue to the next step in the configuration process, go to section 2.3.1.2 Enable TCP/IP.
Copyright 1997 Unoverica Corporation, All Rights Reserved page
Send comments to docs@unoverica.com