Unoverica Message Transport v2.11 Chapter 3: Installing and Starting Unoverica Message Transport

Chapter 3: Installing and Starting Unoverica Message Transport

3.3.2.2 Using INSTALL.NLM on NetWare 4.x or IntranetWare

Once you have expanded the UCM.EXE self-extracting archive to its destination, load INSTALL.NLM by executing the following command from the NetWare console prompt:

:LOAD INSTALL <Enter>

If you are on a NetWare 4.x or IntranetWare server, you should see a screen similar to the following:

Figure 3.3: INSTALL.NLM's main menu (NetWare 4.x).

Select the "Product Options" menu item and press <Enter>. You will be presented with a list of optional products that were provided with the version of NetWare that you purchased, similar to the following:

Figure 3.4: INSTALL.NLM's list of optional products (NetWare 4.x).

Select the "Install a Product Not Listed" menu option, and press <Enter>. You will be presented with a dialog box informing you of your installation options, similar to the following:

Figure 3.5: Product installation options (NetWare 4.x).

At this point, you will likely need to modify the default source directory provided by INSTALL.NLM.

If you are installing from a temporary directory on the server, press <F3> and type the name of the temporary directory that you created on the NetWare server in section 3.3.1.1 Extracting to the Server into the dialog box.
If you are installing from a remote workstation, press <F4> and type the name of the local directory (including the drive letter) into the dialog box provided.
If you are installing from a floppy diskette on the server, and drive A: is the drive that you wish to use, then you can accept the defaults. Otherwise, press <F3> and type the drive letter of the NetWare server’s floppy drive that contains the installation diskette.

STEP: To continue to the next step in the installation process, go to section 3.3.3 Unoverica Message Transport’s Installation Utility.