The "NetWare Directory Services Context (+NWDSCONTEXT)" option specifies the starting point in NDS for the directory synchronization. If the option is enabled but does not specify a starting context, then the entire NDS tree is synchronized with Unoverica Message Transport’s directory. If you wish to start the synchronization at a specific location in the tree, you can define the starting context explicitly by using the "O=" or "OU=" context syntax.
The "NetWare Directory Services Context (+NWDSCONTEXT)" option is defined through the use of Unoverica Message Transport’s UCMCON.NLM management tool. To load UCMCON, type the following command at the NetWare console prompt:
:LOAD UCMCON <Enter>
You will be presented with a screen similar to the following:
Figure 4.1: UCMCON's main menu.
Select the "Configuration" menu item and press <Enter>. You will then be presented with a set of configuration menu choices similar to the following:
Figure 4.2: UCMCON's Configuration menu.
Select the "Options" menu option and press <Enter>. You will then be presented with a list of the currently defined options, similar to the following:
Figure 4.3: UCMCON's currently-defined options.
Use the <Up>, <Dn>, <PgUp> and <PgDn> keys to scroll through the list of currently-defined options, looking for an entry titled "NetWare Directory Services Context (+NWDSCONTEXT)". If this option is not listed, press <Ins> to display a list of the undefined options. You will be presented with a screen similar to the following:
Figure 4.4: UCMCON's undefined options.
If the "NetWare Directory Services Context (+NWDSCONTEXT)" option was not available in the list of currently-defined options, then select it from the list of undefined options and press <Enter>. If the "NetWare Directory Services Context (+NWDSCONTEXT)" option was already in the list of currently-defined options, then select it from that list and press <Enter>. You should see a screen similar to the following:
Figure 4.5: Editing the "NDS Context" option.
You can specify an NDS context at which to start the directory synchronization, or you can leave the option blank, indicating that directory synchronization should start at the root of the NDS tree.
Once you have specified a starting context, press <Enter> to enable the option, and then press <Esc> to close the dialog box. If this option was not already listed in the currently-enabled list of options, then it will be added to that list automatically. Continue pressing <Esc> until you are returned to the NetWare console prompt.
For more information on the "NetWare Directory Services Context (+NWDSCONTEXT)" option, refer to section F.2.25 NetWare Directory Services Context (+NWDSCONTEXT).
STEP: To continue to the next step in the configuration process, go to section 4.2.1.2 Defining the Containers to Include.
Copyright 1997 Unoverica Corporation, All Rights Reserved page
Send comments to docs@unoverica.com