Exporting the local directory is achieved through the use of UCMCON.NLM management tool. To load UCMCON, type the following command at the NetWare console prompt:
:LOAD UCMCON <Enter>
You will be presented with a screen similar to the following:
Figure 4.41: UCMCON's main menu.
Select the "Configuration" menu item and press <Enter>. You will then be presented with a set of configuration menu choices similar to the following:
Figure 4.42: UCMCON's Configuration menu.
Select the "Directory" menu option and press <Enter>. You will then be presented with a list of directory-specific choices, similar to the following:
Figure 4.43: UCMCON's Directory menu.
Select the "Export" menu option and press <Enter>. You will then be presented with a screen similar to the following:
Figure 4.44: Exporting the local directory.
Enter a destination file name for the export file, and choose the format of the destination file that you want to use.
NOTE: Alias accounts stored in the internal directory are exported along with the user records, although aliases stored in external text files are not exported.
WARNING: Unoverica Corporation strongly recommends that you use the "Tab Delimited" format for the import file format, and not the "Comma Delimited" format, as embedded commas may cause problems with other applications that may be used to create or modify the import file.
For more information about the export file, refer to section G.5 Format of the Export/Import Files.
STEP: To continue with the exporting or importing of directories, go to section 4.5.1 Exporting the Directory. To configure Unoverica Message Transport’s mail routing services, allowing mail to be sent and received to a domain, or to configure Unoverica Message Transport to work with a firewall, go to Chapter 5:Configuring Mail Routing.
Copyright 1997 Unoverica Corporation, All Rights Reserved page
Send comments to docs@unoverica.com